Car Alarm System Pandora Smart Pro V3

The Pandora Smart Pro is the ultimate solution for monitoring, controlling and tracking your vehicle. The Smart Pro model comes with a GPS/GLONASS receiver for the tracking function. The alarm system is equipped with the latest Bluetooth technology and fast UMTS modem for smartphone integration. Simply add your alarm system in the app and monitor several vehicles with just one login. Thanks to the built-in GSM modem, the system can make calls, receive commands via phone keypad and send telemetry data to any internet-enabled device. The GPS/GLONASS module continuously records the vehicle's position. The connection between the mobile phone and the alarm system is made via Bluetooth at close range. As soon as you move away, the system switches to UMTS/GPRS. This keeps you informed and connected to the vehicle at all times.

The Pandora Smart Pro system includes numerous safety and convenience features. You can access the extensive functions via vehicle remote control; Bluetooth transponder, smartphone app and web browser. The system has a 2xCAN interface, parking heater connection (LIN / W-BUS) and freely programmable inputs/outputs to tailor the system to your individual needs. The integrated GPS/GLONSS module continuously records the vehicle position.  The 2G / 3G connection extends the range in which you can control the system and receive notifications about alarms and status messages in the network coverage area.

A security mode permanently monitors the connection between the alarm system and the server. If this is interrupted, e.g. if the signal is disturbed (jammer), you will receive a message on your smartphone.

Bluetooth 5

• You can control your system via Bluetooth application (without 3G/GPRS connection). With the encrypted Bluetooth protocol, you can teach additional modules. For example, a comfort relay, engine compartment module which reduces the wiring to a minimum or the 3D radio sensor (DMS-100BT). The system can be configured at close range via the app.

The integrated 2G/4G LTE interface

• The 2G / 4G LTE connection extends the network coverage compared to a normal GSM system and controls the system on the LTE network without delay. You also receive important alarm and service messages in real time. You have your car in view at all times and everywhere. Especially abroad, where the old 2G/GSM network has been switched off or will be switched off in the near future, an alarm system with the latest mobile phone technology makes sense. Especially if your vehicle is taken abroad after being stolen, you want to be able to reliably use the alarm and tracking function there as well.
  

Integrated GPS / GLONASS receiver

• A built-in receiver has low power consumption, high sensitivity and minimal response time after "cold" and "warm" start.  It ensures reliable tracking at low GPS / GLONAS signal levels and in urban areas.

Security features

• The alarm system has 11 safety zones which operate independently of each other. An internal 3D sensor reacts to impacts against the vehicle. The 3D technology also monitors the vehicle's tilt and rolling away. Doors, bonnet, ignition and tailgate are evaluated either analogue or via CAN-BUS, depending on the vehicle. In addition, the system can be expanded to include further alarm sensors (e.g. ultrasound/radar). When disarming, the system searches for paired transponders or the vehicle owner's mobile phone. If none is present, the system triggers the alarm, as it must be assumed that the radio signal or the door lock has been tampered with. This function prevents disarming with a copied radio code or with an extended keyless signal. Depending on requirements and vehicle equipment, this function can be switched on or off. An immobiliser that works independently of the original vehicle immobiliser makes it more difficult for thieves to start the vehicle.

Immobiliser bypass with cloning technology

• The Immo-Key port and the Pandora clone service enable the implementation of an algorithmic bypass of the factory immobiliser. This enables remote engine starting via app on many vehicles without the vehicle key having to remain in the vehicle. The remote start function is not permitted in the area of the StVZO and is not implemented in vehicles in public traffic.

App-application

• New Android and iOS app provides detailed service information and event history. It allows you to change the system settings and control the main functions of the system. Activating/deactivating, checking the fuel level, parking heater, switching the lights are just some of the possible functions of the Pandora alarm system. The Bluetooth function of the app turns your mobile phone into a radio transponder to implement the Hands Free function and serve as an access authorisation.

Bluetooth-Transponder

• The set of each Pandora alarm system contains small flat Bluetooth transponders. Optionally, you can use the transponder's button to activate/deactivate the alarm system. The Bluetooth interface enables a reliable Hands Free function with adjustable range. This means that simply by approaching your vehicle, you can disarm the system and open the central locking - without pressing a button !

Scope of delivery

• Alarm system control unit
• Code-card
• 2 Bluetooth transponders
• Temperature sensor for the engine compartment
• Siren
• Cable set
  
• Breaker relay
  
• Instructions

Note:

• The stated RRP price includes the installation costs for installation in Bad Segeberg.