Universal AMPIRE Bluetooth receiver for vehicles that have a 3.5 mm jack and USB jack as an AUX inputJust plug in both plugs and go - Plug & PlayPower supply via USB and music playback via the cableThe Bluetooth receiver can be installed out of sight because it has no controls or buttons that need to be operatedAll settings such as volume, music selection, and play / pause are performed on your device (e.g. mobile phone)Details:Splash-proof, marine certifiedAutomatic activationQDL licensed Bluetooth 4.0 CRS I9chipA2DP in the highest EDR specification - BT audio streaming also uncompressed files like Wave, Flac, Lossless, MP3 etc.3.5 mm jack plug with signal output 1.0 VSSID Display Name: BTR300Connections:USB input (5 VDC power supply)3.5 mm jack outputTechnical specifications:Voltage: 5 volts DCCurrent consumption: 40 mA max.Bluetooth 4.0Frequency range: 20 Hz-20 kHzOutput voltage: 1 V RMSCable length: 300 mmScope of delivery:Plug & Play Bluetooth receiverNote:Several devices can be connected to the BTR300, but only one device can stream musicThe BTR300 always remembers the most recently remodeled device and connects itself automatically after switching onA connection to another device must be performed manuallyIf the connected device is out of range for more than a minute, the connection is automatically interrupted and the BTR300 goes into pairing mode [the LED (6) flashes]BLUETOOTH APPROVAL - Declaration ID D025151 Referenced Qualified Design ID 56386 - Listing Date 08 December 2014If your vehicle does not have a USB interface, you can realize this with our USB charging adapter for the cigarette lighter article no. 38097

This universal A2DP Bluetooth receiver was developed for vehicles with Cinch sockets and 12 Volt electrical system as AUX input The AMPIRE BTR100 Bluetooth receiver offers the possibility to play music from the mobile phone via the AUX connectorThe housing is weatherproofed, splashproofed (marine certified) and very stableAutomatic switch on by ignition onAutomatic Remote OutputTechnical specifications:Voltage: 12 V DCCurrent consumption: 40 mA max.Bluetooth 4.0 CRS I9chipFrequency range: 20 Hz-20 kHzRCA connectors (red, white) with signal output 1.0 VDimensions 65 x 50 x 19 mmScope of delivery:AMPIRE BTR 100 Bluetooth ReceiverNote:The vehicle must have an AUX or multimedia interface (for example MDI, AMI)You can connect multiple devices with the BTR 100, but only one device can stream musicThe BTR 100 connects automatically to the last stored device. A connection to another device has to be done manuallyThe BTR100 can be installed out of visibility, because it has no button or controller, which need to be activated or something else

Specific adapter for upgrading from MULF / TCU to ComboxCombox will be needed in additionConnection between vehicle loom and new ComboxFeatures of Combox:BluetoothBluetooth AudioAlbum Art CoversOffice menuInternetBMW LiveScope of delivery:Antenna adapterNote:The iDrive (CIC) software may need to have an update For using BMW Internet as well as BMW Live Service a smart phone with Bluetooth tethering is required With iPhone 3GS, 4, 4s the personal hotspot must be enabled (please check the contract of your provider)

Specific adapter for upgrading from MULF/ TCU to ComboxCombox will be needed in additionConnection between vehicle loom and new ComboxCombox with Telematic requires an additional FAKRA adapter (on request) Features Combox:BluetoothBluetooth AudioAlbum Art CoversOffice menuInternetBMW Live  Selectable options:TCU onlyMulf + TCUMulf onlyCable length:On Item number 39067 & 39067-2:Between the connector: 200 mmCAN BUS wires: 1000 mmOn Item number 39067-1:Between the connector: 400 mmCAN BUS wires: 1000 mmScope of supply:AdapterNote:The iDrive (CIC) software may need to have an update For using BMW Internet as well as BMW Live Service a smart phone with Bluetooth Tethering is required In case of iPhone 3GS, 4, 4s the Personal must be enabled (please check the contract of your provider)