Deactivation dongle automatic parking brake in P or key withdrawal for Mercedes Benz

• With this dongle it is possible to prevent the automatic activation of the parking brake in gear position P or by withdrawing the ignition key
• Suitable for the following vehicles
• A-Class series 177
  
• EQA-Class series 243
• B-Class series 247
• CLA-Class series 118
  
• C-Class series 205
  
• CLS series 218
• E-Class series 213
• E-Class Cabrio series 238
• CLS-Class series 257
• GLA-Class H247 series 247
  
• GLB-Class X247 series 247
• GLC-Class X253 series 253
• GLC-Class C253 series 253
• EQC-Class series 293
• GLE-Class V167 series 167
  
• GLE-Class C167 series 167
• GLS-Class X167 series 167
  
• G-Class series 463 from 2018
• S-Class series 222
• S-Class Coupe and Cabrio series 217
• V-Class series 447
• Sprinter series 907 / 910
  
• Hymer B-Class
  
• Hymer ML-T
• Hymer Tramp S
• Hymer Free S
• Other models on request
• Activation and deactivation via the diagnostic interface of your vehicle
• Simply connect the adapter to the OBD interface of the vehicle - done!
• After successful coding, the parking brake will not automatically engage when switching to gear position P or by withdrawing the ignition key
• The function is not permanently activated, but can be reactivated at any time with the dongle
• Example: 1st use = Deactivation of the automatic parking brake in P or by withdrawing the ignition key
• 2nd use = Reset to factory settings (activation of the automatic parking brake in P or by withdrawing the ignition key)
• 3rd use = Deactivation of the automatic parking brake in P or by withdrawing the ignition key
• 4th etc.

Scope of delivery:

• 1x Deactivation dongle

Note:

• The deactivation dongle can only be used for one vehicle
• An electric parking brake is required
• If the existing parking brake is defective, it must be repaired by a specialist workshop before using the dongle. This dongle does not repair a defective parking brake.